
KSZ29-VIRANIX Stone Carpet 3–5 mm Two-Component (25 kg)
Topcoat
VIRANIX 2K coarse-grain stone carpet is a professional floor-covering system with an exclusive look. The kit contains 25 kg of premium marble aggregate and a precisely matched epoxy binder with a total weight of 1.2 kg (A+B). Together they form a robust, highly stable surface.
- Strong adhesion and load-bearing capacity: The two-component (A+B) epoxy binder provides high bond strength, so even the coarse grains hold together firmly.
- Precisely measured ratios: No guesswork – the kit contents are correctly proportioned: simply mix the resin components thoroughly and pour them onto the aggregate.
- Exclusive, rustic look: The coarse-grain structure offers a premium appearance and very good drainage – the stone carpet is open-pored and water-permeable and does not replace waterproofing.
- Outdoor protection: Epoxy resins are UV-sensitive (they may yellow slightly). For long-term color retention outdoors, an additional UV-resistant topcoat is available as an option: VIRANIX 2K PRO PU Topcoat.
Material calculator
Due to the coarse grain, the coverage of one complete kit (26.2 kg) is as follows:
- Recommended thickness: 8–10 mm
- Coverage: ~1.5–2 m² / kit
- Recommended thickness: 10–12 mm
- Coverage: ~1.2–1.5 m² / kit
*Figures apply to flat surfaces. On uneven substrates, consumption may increase slightly.
Reliable adhesion and layer build-up
For reliable adhesion, first treat the surface with VIRANIX 2K PRO PU Primer. If ground moisture is suspected, use VAPOGRIP EP 2K instead of the PU primer.
Thoroughly mix components "A" and "B" of the epoxy resin (1.2 kg in total), then pour onto the 25 kg of coarse aggregate and turn over evenly. Spread with a stainless steel trowel.
For additional surface protection and UV protection (to reduce yellowing):
• Outdoors (UV protection): VIRANIX 2K PRO PU Topcoat
Technical and storage data
- Packaging: 25 kg stone + 1.2 kg resin
- Grain size: Coarse grain
- Walkable after: ~24 hours (at 20 °C)
- Full load capacity: after 4–5 days
- Temperature: between +10 °C and +30 °C
- Shelf life: 12 months from production
- Storage: frost-free, above +5 °C
Maximum durability requires the exact mixing ratio (use all of components A+B) and, for coarse-grain materials, the increased layer thickness (minimum 8–10 mm).
Safety information: Epoxy resin is irritating. Wearing protective gloves and goggles is recommended. Harmful if swallowed. Keep out of the reach of children.Home delivery
arajanlat@viranix.hu
Premium quality


VIRANIX is not a “simple covering” but a system solution in which preparation, priming, stone carpet and topcoat together determine the result.
This ensures that the surface is not only attractive but also remains predictable and easy to maintain in the long term.
Frequently asked questions
What is VIRANIX stone carpet and what is it made of?
VIRANIX 1K stone carpet is a single-component, factory pre-mixed covering: selected natural marble pebbles with a water-based binder. There is no component dosing or mixing ratio, but it must be stirred thoroughly at low speed before use. It can be used outdoors and indoors, on floors and walls.
Which surfaces can VIRANIX stone carpet be used on?
With proper preparation and the right layer build-up, VIRANIX stone carpet can be used on outdoor and indoor surfaces, for example:
- terraces, balconies, stairs,
- garages (medium grain only, with PRIMECOAT 2K PRO topcoat),
- indoor walls, hallways, kitchens, bathrooms.
⚠️ Suitability is not universal; it always depends on the layer build-up, thickness and topcoat. It must not be applied to substrates with rising ground moisture: in that case, the VIRANIX 2K PRO system with VAPOGRIP EP 2K primer is the solution.
Is it suitable for vehicle traffic?
Yes, with the right layer build-up, VIRANIX 1K stone carpet with medium grain is suitable for passenger car traffic.
Requirements:
- medium grain (fine grain is not suitable for vehicle traffic),
- 6–8 mm layer thickness (approx. 12–15 kg/m²),
- TERRALOCK 1K primer,
- PRIMECOAT 2K PRO topcoat.
⚠️ Without these conditions, the covering cannot be considered suitable for vehicle traffic.
What thickness is required for different uses?
General guidance:
- Walls, plinths: 2–4 mm, approx. 6–9 kg/m²
- Terraces, stairs, foot traffic: 4–6 mm, approx. 9–12 kg/m²
- Vehicle traffic (medium grain only): 6–8 mm, approx. 12–15 kg/m², with PRIMECOAT 2K PRO topcoat
The exact thickness is determined by the substrate and the load.
What warranty applies to VIRANIX stone carpet?
As a product, VIRANIX stone carpet is covered by the statutory warranty for defects.
The durability of the finished covering depends on substrate preparation, compliance with the layer build-up and the quality of installation. If you are unsure, ask us for technical support before you start.
Is VIRANIX stone carpet completely smooth?
The stone carpet surface is slightly textured, with a natural stone look.
With a topcoat, the surface becomes more closed and easier to clean, but it will not be mirror-smooth like a resin floor.
The textured surface reduces the risk of slipping.
What are the benefits of a stone carpet covering?
VIRANIX stone carpet is a continuous, seamless covering: no grout joints where dirt can settle. It gives a slightly textured surface with a natural stone look, and with PRIMECOAT 2K topcoat it becomes closed and easy to clean. It can be used on floors and walls, indoors and outdoors, and with the right layer build-up and medium grain it is also suitable for vehicle traffic.
Is a primer required under VIRANIX stone carpet?
Yes. VIRANIX stone carpet must not be applied without a primer. The primer is VIRANIX TERRALOCK 1K: approx. 0.15 kg/m², in a thin, continuous layer, applied with a roller.
The primer's job is:
- to ensure adhesion,
- to even out the absorbency of the substrate,
- to bind dust.
On tiles, a quartz-sand BETOGRIP bonding bridge goes on first, followed by TERRALOCK 1K.
⚠️ With unsuitable or missing priming, adhesion deteriorates and the covering may detach.
Is VIRANIX stone carpet water-permeable or watertight?
Without a topcoat, stone carpet is water-permeable. The 1K system therefore always receives a PRIMECOAT 2K topcoat (PRIMECOAT 2K PRO for vehicle traffic), which seals the pores, giving a closed, easy-to-clean surface.
⚠️ The covering does not replace waterproofing. Outdoors, make sure the substrate has an adequate slope (min. 1.5–2%) so that rainwater can drain away.
Which colors and patterns are available?
In the online store, the pre-mixed 1K stone carpet is available in 16 fine-grain (1–2 mm) and 8 medium-grain (2–4 mm) colors. The photos are for reference only; we recommend requesting a color sample before deciding.
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer service
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ
Use this text to answer questions in as much detail as possible for your customers.
-
Contact us
Use this text to answer questions in as much detail as possible for your customers.

