Hívás: +36 70 575 5500

1K stone carpet installation guide

Everything you need to lay VIRANIX 1K stone carpet, in one printable PDF: working conditions and tools, material requirements with worked examples, substrate preparation, priming, spreading and compacting, two coats of topcoat – with photos of good and bad results, a list of common mistakes and a checklist. The guide is currently available in Hungarian.

Installation guide · PDF

VIRANIX 1K stone carpet system

  • PrimerTERRALOCK 1Kapprox. 0.15 kg/m²
  • Surface1K stone carpet2–8 mm
  • TopcoatPRIMECOAT 2K2 coats
Download the guide

PDF · 14 pages · 3.4 MB · version 1.1, November 2026 · in Hungarian

What's in the guide?

  1. Before you startconditions, tools, workflow
    p. 3
  2. How much material?layer thickness, coverage, calculation
    p. 4
  3. Worked examplesbalcony, garage, kitchen over old tiles, plinth
    p. 5
  4. Step 1 · Substrate preparationconcrete, tiles, walls; water and waterproofing
    p. 6
  5. Step 2 · Edge profiles and primingprofiles, TERRALOCK 1K, on tiles
    p. 7
  6. Step 3 · Spreading and compactingsmall heaps, wet edge, layer thickness
    p. 8
  7. Good and bad examplesphotos, cross-sections, two layers
    p. 9
  8. Drying and scheduletimes, sample schedule for a 12 m² balcony
    p. 10
  9. Step 4 · Topcoat: PRIMECOAT 2Kmixing 20 : 1, application
    p. 11
  10. Mistakes and their consequenceswhat happens and how to prevent it
    p. 12
  11. Checklist and work logprint it and tick it off
    p. 13
  12. Use, care, safetycleaning, storage, frequently asked questions
    p. 14

The key figures

+10…+30 °Ctemperature during work and curing
max. 80%relative humidity
max. 9%substrate moisture content
min. 28 daysage of fresh concrete
6–12 hoursTERRALOCK 1K drying time at 20 °C
12 hoursbetween the two PRIMECOAT 2K coats at 20 °C

How much material do you need?

SurfaceLayer1 bucket (25 kg)
Wall, plinthfine grain2–4 mmapprox. 4 m²
Pedestrian surfaceterrace, balcony, stairs, indoor floor4–6 mmapprox. 2 m²
Vehicle surfacegarage, medium grain only8 mmapprox. 1.5 m²

Guide values without allowance. Primer: TERRALOCK 1K approx. 0.15 kg/m². Topcoat: PRIMECOAT 2K in two coats approx. 0.30 kg/m² (PRIMECOAT 2K PRO on vehicle surfaces). Always round the number of buckets up. For an exact material list, use the calculator.

Important

  • Not suitable for wood, parquet, laminate, OSB or substrates with rising ground moisture.
  • Neither the stone carpet nor the topcoat is a waterproofing: on balconies and on terraces above rooms, it may only be laid on intact, working waterproofing.
  • On old tiles only if they are stable, not hollow and dry: degrease, sand the glaze matt, apply BETOGRIP, then TERRALOCK 1K.
  • The PRIMECOAT 2K topcoat is required indoors too, in two coats – and only on fully dried stone carpet.
  • Do not work in strong direct sun, and protect the fresh surface from rain and strong sun until the topcoat is on. Outdoors, work is not possible below +10 °C.

System components

Any questions?

Call us on +36 70 575 5500 (Monday to Friday, 10:00–16:00), email info@viranix.hu, or visit our showroom: Némedi út 65, 2330 Dunaharaszti, Hungary.

Times and quantities in the guide are guide values (20 °C). Assessing the conditions on site – substrate, moisture, weather – is the installer's responsibility.