Hívás: +36 70 575 5500

VAPOGRIP EP 2K – Product data sheet

VIRANIX product data sheet
VAPOGRIP EP 2K
Two-component, water-based, VOC-free epoxy primer – also for damp and fresh concrete, under epoxy, polyurethane and cementitious systems.
150–200 g/m²
material consumption
75 : 25
mixing ratio (A : B)
3 hours
pot life (20 °C)
7 days
full cure

◆ Product description

Two-component, water-based epoxy primer. It provides high surface hardness, high resistance to vapor, water and chemicals, and high mechanical resistance, and forms a reliable bonding bridge for the subsequent coating. Low odor, non-flammable, VOC-free – well suited for enclosed spaces.

◆ Benefits

Also for damp concrete
For priming damp and fresh concrete surfaces.
Moisture barrier
Forms a barrier against high moisture content.
VOC-free
Low odor, non-flammable, water-based.
Versatile adhesion
Concrete, iron, galvanized steel, aluminum, glass, wood.

◆ Areas of use

  • Enclosed spaces: schools, hospitals, tunnels
  • Primer under epoxy, polyurethane and cementitious systems
  • Primer against negative-side water pressure and moisture
  • Concrete sealing coat, bonding bridge between old and new concrete
Technical data
Product type Water-based epoxy, two-component
Color Transparent
Mixing ratio (A : B) 75 : 25
Dilution if necessary, 10–30% water (max. 30%)
Density (23 °C) 1.00–1.10 g/ml
Pot life 3 hours (20 °C)
Touch dry 18–20 hours (20 °C)
Overcoatable 24 hours (20 °C)
Full cure 7 days (20 °C)
Material consumption 150–200 g/m²
Application tool Roller, brush, rubber squeegee
VOC content 0 g/l
Storage 12 months, between +5 and +25 °C, protected from frost and direct sunlight

◆ Application step by step

1
Substrate: remove weak areas by milling, sandblasting or grinding; roughen surfaces that are too smooth; remove oil and vacuum up dust.
2
Mixing: mix components A and B at a ratio of 75 : 25 until homogeneous, then let stand for 20 minutes. If necessary, dilute with max. 30% water.
3
Application: with a roller, brush or rubber squeegee, at 150–200 g/m².
4
Pot life: use the mixed material within 3 hours (20 °C); do not use material beyond its pot life.

◆ Safety information

GHS05 · CorrosiveGHS07 · IrritantGHS09 · Environmental hazard
Signal word: Danger
Hazard statements:
  • Component A (resin):
  • H315 Causes skin irritation.
  • H317 May cause an allergic skin reaction.
  • H319 Causes serious eye irritation.
  • H411 Toxic to aquatic life with long lasting effects.
  • Component B (hardener):
  • H315 Causes skin irritation.
  • H317 May cause an allergic skin reaction.
  • H318 Causes serious eye damage.
Precautionary statements:
  • P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
  • P273 Avoid release to the environment.
  • P280 Wear protective gloves/protective clothing/eye protection/face protection.
  • P302+P352 IF ON SKIN: Wash with plenty of water and soap.
  • P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P310 Immediately call a POISON CENTER/doctor.
  • P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
  • P501 Dispose of contents/container at a hazardous waste collection point in accordance with local regulations.
Component A contains: bisphenol-A-(epichlorohydrin) epoxy resin (average molecular weight ≤ 700); oxirane, mono[(C12-14-alkyloxy)methyl] derivatives. Component B contains: tetraethylenepentamine. Hungarian Toxicological Information Service (0–24 h): +36 80 201 199 (toll-free) · +36 1 476 6464.
Distributor: VIRANIX Hungary Kft. · 2724 Újlengyel, Petőfi Sándor utca 48. · +36 70 575 5500 · info@viranix.hu