Hívás: +36 70 575 5500

Epoxy repair and anchoring mortar – Product data sheet

VIRANIX product data sheet
Epoxy repair and anchoring mortar
Two-component, solvent-free, paste-consistency epoxy mortar for repairs, anchoring, and bonding fixtures and expansion joint tapes.
≥ 75 N/mm²
compressive strength (7 days)
2–30 mm
layer thickness
approx. 40 min
working time (23 °C)
5 kg
A + B kit

◆ Product description

Two-component, chemically curing, solvent-free, high-strength epoxy mortar. Thanks to its paste consistency it does not sag even on vertical surfaces, fills well and adheres excellently to concrete and steel.

◆ Areas of use

  • Setting rebar and dowels in concrete and stone walls
  • Fixing metal and steel structural elements to concrete
  • Fixing railings and anchor elements
  • Bonding expansion joint tapes (DILITAPE)
  • Repairing concrete edges and spalling
Technical data
Chemical composition Paste-consistency, high-strength epoxy resin
Color Gray (mixed)
Density 1.70 ± 0.05 g/cm³
Layer thickness 2–30 mm
Working time approx. 40 min (23 °C)
Flexural tensile strength 1 day: ≥ 17 N/mm², 7 days: ≥ 25 N/mm²
Compressive strength 1 day: ≥ 30 N/mm², 7 days: ≥ 75 N/mm²
Bond strength 1 day: ≥ 3.5 N/mm², 7 days: ≥ 3.0 N/mm²
Curing (23 °C, 55% RH) overcoatable after 8–24 hours, full cure 7 days
Material consumption approx. 1.7 kg/m² per mm
Application tool Spatula, trowel, caulking gun
Storage 12 months, unopened, in a dry place, between +5 and +25 °C
Packaging 5 kg kit (3.75 kg A + 1.25 kg B)

◆ Mixing and application

1
Mixing: mix the entire contents of components A and B with a low-speed mixer for at least 2 minutes until uniformly gray – without entraining air.
2
Re-mixing: pour into a clean container and continue mixing for approx. 1 minute.
3
Application: with a spatula, trowel or caulking gun, 2–30 mm thick; fill drill holes from the bottom up.
4
Anchoring: insert the element into the mortar-filled hole with a twisting motion – the mortar must squeeze out of the hole.

◆ Safety information

GHS05 · CorrosiveGHS07 · IrritantGHS08 · Health hazardGHS09 · Environmental hazard
Signal word: Danger
Hazard statements:
  • Component A (resin):
  • H315 Causes skin irritation.
  • H317 May cause an allergic skin reaction.
  • H319 Causes serious eye irritation.
  • H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
  • H335 May cause respiratory irritation.
  • H411 Toxic to aquatic life with long lasting effects.
  • Component B (hardener):
  • H312 Harmful in contact with skin.
  • H314 Causes severe skin burns and eye damage.
  • H317 May cause an allergic skin reaction.
  • H332 Harmful if inhaled.
Precautionary statements:
  • P102 Keep out of reach of children.
  • P273 Avoid release to the environment.
  • P280 Wear protective gloves/protective clothing/eye protection/face protection.
  • P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
  • P305+P351+P338+P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
  • P501 Dispose of contents/container in accordance with local regulations.
Hungarian Toxicological Information Service (0–24 h): +36 80 201 199 (toll-free) · +36 1 476 6464.
Distributor: VIRANIX Hungary Kft. · 2724 Újlengyel, Petőfi Sándor utca 48. · +36 70 575 5500 · info@viranix.hu