AQUASHIELD ACRYL UV-1K – Product data sheet
◆ Product description
Ready-to-use, solvent-free waterproofing coating based on elastomeric resin. No components to mix – apply with a roller or brush. Once cured, it forms a seamless, flexible, UV-resistant, crack-bridging layer – for waterproofing and renovating roofs, gutters and exterior surfaces.
◆ Benefits
Ready to use, no components to mix.
Also for surfaces exposed to direct sunlight.
Stays flexible and follows movement with 300% elongation.
Solvent-free, non-flammable.
High bond strength to the substrate.
With ARMURNET reinforcement fabric embedded in the layer.
◆ Areas of use
- Pitched terrace roofs, renovation of old roofs
- Metal roofs, corrugated sheet roofs
- Gutters: concrete, zinc and precast gutters
- Waterproofing of exterior walls, damp areas
| Technical data | |
|---|---|
| Chemical basis | Elastomeric resin, water-based |
| Color | White (off-white), gray |
| Density | 1.37 g/cm³ |
| Solids content | 70% |
| Elasticity | 300% |
| Waiting time between coats | 4–8 hours |
| Material consumption | approx. 1.5 kg/m² per 1 mm layer thickness |
| Application tool | Roller, brush |
| Tool cleaning | With water, before curing |
| Storage | Protect from frost, in the closed original container |
| Packaging | 5 kg |
◆ Application step by step
◆ Safety information
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P261 Avoid breathing vapors/spray.
- P280 Wear protective gloves/eye protection.
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P501 Dispose of contents/container in accordance with local regulations.
Buy: AQUASHIELD acrylic waterproofing in the webshop →

