VIRANIX Hungary Kft. VIRANIX Hungary Kft.

VIRANIX stone carpet is a single-component, pre-mixed flooring system made of natural, selected stone aggregate and a special, flexible, custom-developed binder. The system can be used directly, without mixing, allowing for fast, clean, and reliable installation both outdoors and indoors.

With proper preparation and layer structure, VIRANIX stone carpet can be applied to outdoor and indoor surfaces, for example:

• terraces, stairs, walkways,
• driveways,
• interior walls, hallways, kitchens, bathrooms.

⚠️ Specific suitability is never general — it always depends on the layer structure, thickness, and topcoat used.

Yes, with the proper layer structure, VIRANIX stone carpet is suitable for passenger vehicle loads.

Conditions:

• minimum 6-8 mm layer thickness,
• proper priming,
• applying VIRANIX PRIMECOAT 2K topcoat.

⚠️ Without the above conditions, the product cannot be considered suitable for vehicle loads.

General guidance (not a binding recommendation):

• Interior wall: approx. 2–3 mm
• Terrace, stairs, pedestrian traffic: approx. 4–6 mm
• Vehicle loads: minimum 6-8 mm + 2K topcoat

The exact thickness is determined by the substrate and the load.

As a product, VIRANIX stone carpet is covered by the statutory warranty for defects.

In addition:

• 15-year system and material warranty if installation is carried out by an official VIRANIX partner according to the specified layer structure
• 3-year warranty if installation is carried out by a non-official partner

⚠️ The warranty does not cover an unsuitable substrate, installation errors, or deviation from the layer structure.

The surface of the stone carpet is finely textured, with a natural stone effect.
With a topcoat, the surface becomes more sealed and easier to clean, but it won't be mirror-smooth like a resin floor.

This property is what provides the slip resistance.

VIRANIX stone carpet is a slip-resistant, UV-resistant, frost-resistant, and extremely durable flooring. Its flexible structure handles thermal expansion well, gives a modern look, and with the proper topcoat is easy to keep clean. With the proper layer structure, it's also suitable for vehicle loads.

Yes. VIRANIX stone carpet cannot be applied without priming.

The primer's job is:

• ensuring adhesion,
• equalizing the substrate's absorbency,
• increasing the flooring's service life.

⚠️ If priming is improper or skipped, the flooring's adhesion may suffer, and this is not covered by the warranty.

Unlike conventional (porous) systems, VIRANIX stone carpet with the proper layer structure forms a completely waterproof surface. Thanks to its sealed structure, moisture and dirt cannot penetrate the material.

• Outdoors: Together with the mandatory VIRANIX PrimeCoat 2K topcoat, it provides 100% waterproofing and UV protection, protecting the substrate from water damage and frost.
• Indoors: It forms a sealed, hygienic surface that (treated with a topcoat) is easy to mop and keep clean.

⚠️ Important tip for outdoor use: Since the flooring is waterproof (water doesn't flow through it), when installing on terraces and outdoor surfaces, you must ensure the substrate has a proper slope (min. 1.5–2%) so rainwater can drain off the surface unobstructed!

VIRANIX stone carpet is available in more than 24 color variations and 2 grain sizes, making it easy to match any setting.